Multihull Wiki

Boat intake โ€” community-contributed specifications with sources

โž• Add a model  ยท  ๐Ÿ“Š Browse published models  ยท  ๐Ÿ™‹ Designs needing data  ยท  ๐Ÿ“‹ Bulk CSV

Catana 471

catamaran ยท approved by moderator

Performance & stability indicators

Calculated from the specifications below. Comparative aids only โ€” not a stability assessment.

SA/D โ€” Sail area / displacement

Power-to-weight ratio of the rig โ€” the classic comparison ratio. Imperial: SA ftยฒ รท (displacement lb รท 64)^โ…”. Higher = more powerful for its weight.

โ€” needs sail area + light displacement
BN โ€” Bruce number

Power-to-weight indicator of speed potential (โˆšSA ftยฒ รท displacement lb^โ…“). Below ~1.3 is slow in light airs; ~1.6 reefs early offshore.

โ€” needs sail area + light displacement
BSpd โ€” Base speed

Distance a boat could average over 24 hours, empirically derived (Richard Boehmer, 1989). Also used to handicap mixed-fleet races.

โ€” needs LWL + sail area + displacement
KSP โ€” Kelsall speed prediction

Derek Kelsall's performance index (PI-C ร— 10), expressed in knots โ€” an estimate of speed potential on a reach. A value of 8 โ‰ˆ 8 knots in a 10-knot wind.

โ€” needs LWL + sail area + displacement
Texel โ€” Texel rating (Multihull Dynamics)

Multihull Dynamics simplified Texel approximation - matches the numbers they published. LOWER = faster.

โ€” needs LWL + sail area + displacement
Texel* โ€” Texel rating (official / global)

The authoritative CTC / Watersportverbond Texel formula - the same core used by OMR (Australia) and Multi 2000 (France). Includes crew weight, so it sits on a higher numerical scale than the MD approximation (identical ordering). LOWER = faster.

โ€” needs rated length + rated sail area + boat + crew weight
SSpd โ€” Stability speed

Wind speed (knots) at which the windward hull of a catamaran (or main hull of a trimaran) begins to lift โ€” Shuttleworth, incl. a 40% gust factor. Higher = more stable.

โ€” needs beam centreline + displacement + sail area
KSI โ€” Kelsall stability indicator

Indicator of resistance to sideways capsize (Derek Kelsall). Higher = more resistant.

โ€” needs beam centreline + displacement + sail area

Specifications

Identity
ManufacturerCatana
Model471
Variantโ€”
Year fromโ€”
Year toโ€”
Hull typecatamaran
Boat styleโ€”
Constructionโ€”
Dimensions
LOA (m)14.3 (46.92 ft)
Waterline length (m)โ€”
Beam overall (m)7.7 (25.26 ft)
Beam waterline (m)โ€”
Hull width (m)โ€”
Beam centreline (m)โ€”
Bridge deck clearance (m)โ€”
Draft min (m)โ€”
Draft max (m)โ€”
Board typeDaggerboard
Weights & sail
Displacement light (kg)10000 (22046.20 lb)
Displacement loaded (kg)โ€”
Sail area upwind (mยฒ)โ€”
Sail area downwind (mยฒ)โ€”
Systems & interior
Total engine power (kW)โ€”
Number of engines2
Fuel (L)โ€”
Water (L)โ€”
Berthsโ€”
Headroom (m)โ€”
Notes & source
Notesโ€”
SourcesMulticoques Mag spec sheet (medium) - https://www.multihulls-world.com/technical-specifications/catana-sa/catana-471
approved_bymoderator
approved_at2026-10-30 20:21:30

Official Texel* — propeller adjustment

Texel* above uses a propeller factor of 1 (retractable / unknown). Propellers are commonly swapped between otherwise identical boats, so pick a configuration here to compare like-for-like. Board type recorded: Daggerboard (already reflected in Texel*).

Texel* with propellers: โ€”

โ† All published models

wiki.myboatmechanic.co.nz ยท data enters a moderation queue first