Multihull Wiki

Boat intake β€” community-contributed specifications with sources

βž• Add a model  Β·  πŸ“Š Browse published models  Β·  πŸ™‹ Designs needing data  Β·  πŸ“‹ Bulk CSV

Fountaine Pajot Belize 43 Maestro

catamaran Β· built 2000–present Β· approved by moderator

Performance & stability indicators

Calculated from the specifications below. Comparative aids only β€” not a stability assessment.

SA/D β€” Sail area / displacement

Power-to-weight ratio of the rig β€” the classic comparison ratio. Imperial: SA ftΒ² Γ· (displacement lb Γ· 64)^β…”. Higher = more powerful for its weight.

β€” needs sail area + light displacement
BN β€” Bruce number

Power-to-weight indicator of speed potential (√SA ftΒ² Γ· displacement lb^β…“). Below ~1.3 is slow in light airs; ~1.6 reefs early offshore.

β€” needs sail area + light displacement
BSpd β€” Base speed

Distance a boat could average over 24 hours, empirically derived (Richard Boehmer, 1989). Also used to handicap mixed-fleet races.

β€” needs LWL + sail area + displacement
KSP β€” Kelsall speed prediction

Derek Kelsall's performance index (PI-C Γ— 10), expressed in knots β€” an estimate of speed potential on a reach. A value of 8 β‰ˆ 8 knots in a 10-knot wind.

β€” needs LWL + sail area + displacement
Texel β€” Texel rating (Multihull Dynamics)

Multihull Dynamics simplified Texel approximation - matches the numbers they published. LOWER = faster.

β€” needs LWL + sail area + displacement
Texel* β€” Texel rating (official / global)

The authoritative CTC / Watersportverbond Texel formula - the same core used by OMR (Australia) and Multi 2000 (France). Includes crew weight, so it sits on a higher numerical scale than the MD approximation (identical ordering). LOWER = faster.

β€” needs rated length + rated sail area + boat + crew weight
SSpd β€” Stability speed

Wind speed (knots) at which the windward hull of a catamaran (or main hull of a trimaran) begins to lift β€” Shuttleworth, incl. a 40% gust factor. Higher = more stable.

β€” needs beam centreline + displacement + sail area
KSI β€” Kelsall stability indicator

Indicator of resistance to sideways capsize (Derek Kelsall). Higher = more resistant.

β€” needs beam centreline + displacement + sail area

Specifications

Identity
ManufacturerFountaine Pajot
ModelBelize 43
VariantMaestro
Year from2000
Year toβ€”
Hull typecatamaran
Boat styleβ€”
Constructionβ€”
Dimensions
LOA (m)13 (42.65 ft)
Waterline length (m)β€”
Beam overall (m)7 (22.97 ft)
Beam waterline (m)β€”
Hull width (m)β€”
Beam centreline (m)β€”
Bridge deck clearance (m)β€”
Draft min (m)β€”
Draft max (m)β€”
Board typeFixed keel (no board)
Weights & sail
Displacement light (kg)8100 (17857.42 lb)
Displacement loaded (kg)β€”
Sail area upwind (mΒ²)β€”
Sail area downwind (mΒ²)β€”
Systems & interior
Total engine power (kW)β€”
Number of engines2
Fuel (L)β€”
Water (L)β€”
Berthsβ€”
Headroom (m)β€”
Notes & source
Notesβ€”
SourcesMulticoques Mag spec sheet + Wikipedia Fountaine-Pajot (medium) - https://www.multihulls-world.com/technical-specifications/fountaine-pajot/belize-43
approved_bymoderator
approved_at2026-10-30 20:21:33

Official Texel* — propeller adjustment

Texel* above uses a propeller factor of 1 (retractable / unknown). Propellers are commonly swapped between otherwise identical boats, so pick a configuration here to compare like-for-like. Board type recorded: Fixed keel (no board) (already reflected in Texel*).

Texel* with propellers: β€”

← All published models

wiki.myboatmechanic.co.nz Β· data enters a moderation queue first